Flow Line Options Corp - PRWeb Press Release Group
Flow Line Options Corp - Powered by PRWeb and RSSPad
New Flow Transmitter from Flow Line Options Used for Liquid, Gas and Steam Metering
Flow Line Options new MEMFlo MFT transmitter provides flow rate, total and two-wire analog outputs, and works with most of the company's flowmeters. It is being used for steam, gas and liquid flow measurement of water, brine, and even liquid chlorine. (PRWeb Nov 20, 2008)
Read the full story at http://www.prweb.com/releases/2008/11/prweb1643694.htm
New EchoSafe Explosion Proof Ultrasonic Transmitter from Flow Line Options
Flow Line Options introduces EchoSafe, an ultrasonic level transmitter designed for hazardous applications, where an agency certified sensor is needed. It's a two-wire, loop-powered, ultrasonic level transmitter that provides non-contact level measurement up to 10 m (32.8') in hazardous (classified) bulk storage, day tank, waste treatment and sump applications, and challenging corrosives, slurry or waste media. (PRWeb Nov 16, 2007)
Read the full story at http://www.prweb.com/releases/2007/11/prweb570171.htm
New EchoPod Level Switch System Maintains Proper Domestic Well Water Levels from Flow Line Options
Flow Line Options New EchoPod Well Tank Level System uses ultrasonic technology to measure the water level and control the level of well water holding tanks. The new system includes a relay, alarm strobe, and display unit that mounts on the wall or flat surface and is used to indicate the tank level in either gallons or inches. Installation is fast and easy and usually can be done by the homeowner. (PRWeb Sep 17, 2007)
Read the full story at http://www.prweb.com/releases/2007/09/prweb553935.htm
Flow Line Options New P-72 Copolymer Flow Meters Provide Economical Metering of Chlorine And Caustics
Flo-Corp's P-72 Styrene Copolymer heavy bodied meters are specifically designed for demanding applications including chlorine, hot wet chlorine gas, chlorine dioxide, sodium hydroxide, high pH sodium hypochlorite, and brines. Previously limited to select OEM accounts, these flowmeters are now offered to the entire chlor-alkali market, along with wastewater treatment plants, chemical processors, and other users of harsh chemicals. (PRWeb Jun 13, 2007)
Read the full story at http://www.prweb.com/releases/2007/06/prweb532931.htm
New EchoPod Ultrasonic, Non-contacting Level Switch for Small Tanks Monitors and/or Controls from Flow Line Options
The new EchoPod is the only non-contacting, ultrasonic device to monitor small tanks and sumps with a range of 49.2" (1.25 m) or less. This innovative level sensor is the first device to continuously monitor tank level via a 4-20 mA analog output plus four independently programmable alarm and control set points. (PRWeb Mar 8, 2007)
Read the full story at http://www.prweb.com/releases/2007/03/prweb509701.htm
Flow Line Options Acquires MEM Flow Meters for Liquid, Gas and Steam Measurement
Flow Line Options Corp. announced today that it has acquired inventory and all rights to the Meter Equipment Manufacturing (MEM) flowmeter product line. MEM flow meters were renowned for their tough, simple and accurate flow measurement, but have been unavailable since April 2006. Flow Line will resume manufacturing of these direct reading flowmeters in the first quarter of 2007. (PRWeb Jan 2, 2007)
Read the full story at http://www.prweb.com/releases/2007/01/prweb494418.htm
Cost Effective Portable CSO Monitoring System from Flow Line Options
Flow Line Options manufactures new portable Combined Sewer Overflow monitor. The 3” ultrasonic beam cone allows the sensor to be mounted above the flow to prevent fouling. The cost-effective device can be readily converted to a fixed system, and allows municipalities to meet EPA monitoring requirements. (PRWeb Oct 25, 2005)
Read the full story at http://www.prweb.com/releases/2005/10/prweb302103.htm
EchoSafe Explosion Proof Ultrasonic Transmitter
The explosion proof, two-wire ultrasonic transmitter provides non-contact level measurement up to 32.8 feet (10 meters) in hazardous bulk storage, day tank and sump applications, and is well suited for challenging corrosive, slurry or waste media. A narrow, 3" beam diameter enables flexible installations.
Media examples include sodium hypochlorite, wastewater and resin. The integral display and push button module enable fast and simple calibration.
Download Specs (PDF)
AKRON WATER SELECTS "P-72 COPOLYMER" FLOWMETERS FOR CHLORINE SERVICE
The City of Akron's Water Supply Plant selected Flow Line Options' "P-72® Copolymer" Flowmeters for their Sedimentation Basins Rehabilitation Project. Fluids being metered include chlorine and chlorine dioxide.
These heavy bodied flowmeters are specifically designed for demanding applications including chlorine, hot wet chlorine gas, chlorine dioxide, sodium hydroxide, high pH sodium hypochlorite, and brines. They have been in use in chlor-alkali service around the world for years, and one division of Occidental Chemical named them the "safety standard for chlor-alkali service!" Flanged connections are standard, although NPT and socket cement connections are offered as options.
Akron chose Flo-Corp's P-72 meters because they offered superior corrosion resistance to the chlorine solutions. Additionally, MEMFlo meters cost less than the meters originally specified on the job.
Depending on the service, wetted materials are all P-72 Copolymer or P-72 with titanium, electroless nickel plated T310 stainless, and teflon internals for maximum corrosion resistance. Sight tubes may be glass, polysulfone, or P-72 (again, depending on fluid service).
NEW CORIOLIS MASS FLOWMETERS
Utilizing the Coriolis principle, the FCACM series of mass flow meters are superior process control tools that allow real-time measurement of density and flow in liquids, slurries and gases.
The FCACM line features excellent accuracy and large turndowns in single or dual tube designs. The meters feature no moving part s and smooth flow tubes of 316 stainless steel resulting in a design that is easy-to-clean and maintain.
NEW POSITIVE DISPLACEMENT FLOW METERS FOR INDUSTRIAL SERVICE
The FCJV-KG Series represents a positive displacement meter that is affordable andaccurate. One primary feature is the ability to maintain consistent accuracy despite changingviscosity conditions. This reliability, coupled with a large turndown range, offers an affordable replacement for older turbine technology. The meter's solid construction and excellent dynamicr esponse are well suited to the measurement of oil, grease, fuel, solvents, polyurethanes, brake fluid, Skydrol as well as other nonabrasive lubricating fluids.
NEW WIRELESS INSTRUMENT MONITORING WITH SOLAR POWER OPTION
Flow Line Options' wireless solutions provide remote monitoring that have been optimized for use by the water and wastewater utilities.
They are designed for indoor or outdoor environments, with a solar power option for the latter.
Offering a spread spectrum radio with multiple inputs and outputs, numerous options including solar power, and more, this MAPPs system is suitable for indoor and outdoor applications.
NEW PORTABLE CSO / SSO MONITOR CF316
The CF316 is a battery operated CSO & SSO Flow & Level Monitor. Mounted in your manhole, this smart Combined Sewer Overflow monitor cost thousands less than traditional monitors and is built to be convertible for fixed system monitoring with NO added capital cost! Battery life approx. 90 days with level sample every 2 minutes.
“The CF-316 has allowed the city to monitor our CSO's in order to satisfy our EPA requirements and at the same time stay under our budget,” said John S. Christopher, Water Utilities Superintendent.
New Intrinsically Safe Transducer Set for Ultrasonic Flowmeters!
The new Series DTTN transducer is now available in a configuration certified for use in Class 1 Division 1, Groups C & D hazardous environments. The Intrinsically Safe (IS) transducer set is designed specifically for use in a hazardous atmosphere; such as oil refineries, chemical plants and paint manufacturing, in which flammable gases or explosive dust may be present. IS products require designs that prevent the possibility of sparks being generated by high electrical fields and/or intermittent electrical connections.
As with our other ultrasonic flow meters, installation of the IS system is pretty straight forward. The flow meter box - TFXD, TFXL, TFXM - will be located in the non-hazardous area. A short length of cable will connect the TFX to the barriers that are also located in the non-hazardous area. Longer lengths of cable are then needed to connect the output of the barriers to the transducers installed in the hazardous environment. The IS transducer configuration includes a modified set of DTTN ultrasonic transit time transducer heads and an enclosure that contains two high-frequency barriers. The barriers permit the RF signals to transmit back and forth to our transducers, while preventing potentially explosive levels of DC or AC voltage from passing through to the hazardous area. A drawing of a typical application and product setup is available.
The IS transducer can be paired with any of our non-portable transit time transmitter box that is capable of using the Series DTTN standard transducers. The system has been evaluated and approved by CSA according to the applicable CSA and ANSI/UL standards, and will bear the CSA mark with both the 'C' and 'US' indicators. The approval details are noted on the CSA Certificate of Compliance.
